Acetic acid
2006 Wikipedia CD Selection
Acetic acid
General
Systematic name
Acetic acidEthanoic acid
Other names
Methanecarboxylic acidAcetyl hydroxide (AcOH)Hydrogen acetate (HAc)
Molecular formula
C2H4O2
SMILES
CC(=O)O
Molar mass
60.05 g/mol
Appearance
Colourless liquidor crystals
CAS number
[64-19-7]
Properties
Density and phase
1.049 g/cm3, liquid1.266 g/cm3, solid
Solubility in water
Fully miscible
In ethanol, acetoneIn toluene, hexaneIn carbon disulfide
Fully miscibleFully misciblePract. insoluble
Melting point
16.7 °C (289.9 K)(62.1 °F)
Boiling point
118.1 °C (391.2 K)(244.6 °F)
Acidity (pKa)
4.76
Viscosity
1.22 mPa·s at 25 °C
Dipole moment
1.74 D (gas)
Hazards
MSDS
External MSDS
EU classification
Corrosive (C)
NFPA 704
Flash point
43 °C
R-phrases
R10, R35
S-phrases
S1/2, S23, S26, S45
US Permissibleexposure limit (PEL)
10 ppm
Supplementary data page
Structure& properties
n, εr, etc.
Thermodynamicdata
Phase behaviourSolid, liquid, gas
Spectral data
UV, IR, NMR, MS
Related compounds
Related carboxylicacids
Formic acidPropionic acidButyric acid
Related compounds
AcetamideEthyl acetateAcetyl chlorideAcetic anhydrideAcetonitrileAcetaldehydeEthanol
Except where noted otherwise, data are given formaterials in their standard state (at 25 °C, 100 kPa)Infobox disclaimer and references
Acetic acid, also known as ethanoic acid, is an organic chemical compound best recognized for giving vinegar its sour taste and pungent smell. Pure water-free acetic acid is a colourless hygroscopic liquid, readily absorbs water, and freezes below 16.7 °C (62 °F) to a colourless crystalline solid. Acetic acid is corrosive, and its vapour is irritating to eyes and nose, although it is a weak acid based on its ability to dissociate in aqueous solutions.
Acetic acid is one of the simplest carboxylic acids. It is an important chemical reagent and industrial chemical that is used in the production of polyethylene terephthalate mainly in soft drink bottles; cellulose acetate, mainly for photographic film; and polyvinyl acetate for wood glue, as well as many synthetic fibres and fabrics. In households diluted acetic acid is often used in descaling agents. In the food industry acetic acid is used under the food additive code E260 as an acidity regulator.
The global demand of acetic acid is around 6.5 million tonnes per year (Mt/a), of which approximately 1.5 Mt/a is met by recycling; the remainder is manufactured from petrochemical feedstocks or from biological sources.
//
Nomenclature
The trivial name acetic acid is the most commonly used and officially preferred name by the IUPAC. This name derives from acetum, the Latin word for vinegar. The synonym ethanoic acid is a systematic name that is sometimes used in introductions to chemical nomenclature.
Glacial acetic acid is a trivial name for water-free acetic acid. Similar to the German name Eisessig (literally, ice-vinegar), the name comes from the ice-like crystals that form slightly below room temperature at 16.7 °C.
The most common and official abbreviation for acetic acid is AcOH or HOAc where Ac stands for the acetyl group CH3−C(=O)−. In the context of acid-base reactions the abbreviation HAc is often used where Ac instead stands for the acetate anion (CH3COO−), although this use is regarded by many as misleading. In either case, the Ac is not to be confused with the abbreviation for the chemical element actinium.
Acetic acid has the empirical formula C2H4O2. This is often written as CH3-COOH, CH3COOH, or CH3CO2H to better reflect its structure. The ion resulting from loss of H+ from acetic acid is the acetate anion. The name acetate can also refer to a salt containing this anion or an ester of acetic acid.
History
Frozen acetic acid
Vinegar is as old as civilization itself, perhaps older. Acetic acid-producing bacteria are present throughout the world, and any culture practicing the brewing of beer or wine inevitably discovered vinegar as the natural result of these alcoholic beverages being exposed to air.
The use of acetic acid in chemistry extends into antiquity. In the 3rd century BC, the Greek philosopher Theophrastos described how vinegar acted on metals to produce pigments useful in art, including white lead ( lead carbonate) and verdigris, a green mixture of copper salts including copper(II) acetate. Ancient Romans boiled soured wine in lead pots to produce a highly sweet syrup called sapa. Sapa was rich in lead acetate, a sweet substance also called sugar of lead or sugar of Saturn, which contributed to lead poisoning among the Roman aristocracy. The 8th century Persian alchemist Jabir Ibn Hayyan (Geber) concentrated acetic acid from vinegar through distillation.
In the Renaissance, glacial acetic acid was prepared through the dry distillation of metal acetates. The 16th century German alchemist Andreas Libavius described such a procedure, and he compared the glacial acetic acid produced by this means to vinegar. The presence of water in vinegar has such a profound effect on acetic acid's properties that for centuries many chemists believed that glacial acetic acid and the acid found in vinegar were two different substances. The French chemist Pierre Adet proved them to be identical.
In 1847 the German chemist Hermann Kolbe synthesised acetic acid from inorganic materials for the first time. This reaction sequence consisted of chlorination of carbon disulfide to carbon tetrachloride, followed by pyrolysis to tetrachloroethylene and aqueous chlorination to trichloroacetic acid, and concluded with electrolytic reduction to acetic acid.
Detail of acetic acid crystals
By 1910 most glacial acetic acid was obtained from the "pyroligneous liquor" from distillation of wood. The acetic acid was isolated from this by treatment with milk of lime, and the resultant calcium acetate was then acidified with sulfuric acid to recover acetic acid. At this time Germany was producing 10,000 tons of glacial acetic acid, around 30% of which was used for the manufacture of indigo dye.
Chemical properties
Acidity
The hydrogen (H) atom in the carboxyl group (−COOH) in carboxylic acids such as acetic acid can be given off as an H+ ion (proton), giving them their acidic character. Acetic acid is a weak, effectively monoprotic acid in aqueous solution, with a pKa value of 4.8. A 1.0 M solution (about the concentration of domestic vinegar) has a pH of 2.4, indicating that merely 0.4% of the acetic acid molecules are dissociated.
Cyclic dimer
Cyclic dimer of acetic acid; dashed lines represent hydrogen bonds.
The crystal structure of acetic acid shows that the molecules pair up into dimers connected by hydrogen bonds. The dimers can also be detected in the vapour at 120 °C. They probably also occur in the liquid phase of pure acetic acid, but are rapidly disrupted if any water is present. This dimerisation behaviour is shared by other lower carboxylic acids.
Solvent
Liquid acetic acid is a hydrophilic ( polar) protic solvent, similar to ethanol and water. With a moderate dielectric constant of 6.2, it can dissolve not only polar compounds such as inorganic salts and sugars, but also non-polar compounds such as oils and elements such as sulfur and iodine. It readily mixes with many other polar and non-polar solvents such as water, chloroform, and hexane. This dissolving property and miscibility of acetic acid makes it a widely used industrial chemical.
Chemical reactions
Acetic acid is corrosive to many metals including iron, magnesium, and zinc, forming hydrogen gas and metal salts called acetates. Aluminium, when exposed to oxygen, forms a thin layer of aluminium oxide on its surface which is relatively resistant, so that aluminium tanks can be used to transport acetic acid. Metal acetates can also be prepared from acetic acid and an appropriate base, as in the popular " baking soda + vinegar" reaction. With the notable exception of chromium(II) acetate, almost all acetates are soluble in water.
Mg( s) + 2 CH3COOH( aq) → (CH3COO)2Mg(aq) + H2( g)
NaHCO3(s) + CH3COOH(aq) → CH3COONa(aq) + CO2(g) + H2O( l)
Acetic acid undergoes the typical chemical reactions of a carboxylic acid, notably the formation of ethanol by reduction, and formation of derivatives such as acetyl chloride via nucleophilic acyl substitution. Other substitution derivatives include acetic anhydride; this anhydride is produced by loss of water from two molecules of acetic acid. Esters of acetic acid can likewise be formed via Fischer esterification, and amides can also be formed. When heated above 440 °C, acetic acid decomposes to produce carbon dioxide and methane, or to produce ketene and water.
Detection
Acetic acid can be detected by its characteristic smell. A colour reaction for salts of acetic acid is iron(III) chloride solution, which results in a deeply red colour that disappears after acidification. Acetates when heated with arsenic trioxide form cacodyl oxide, which can be detected by its malodorous vapours.
Biochemistry
The acetyl group, derived from acetic acid, is fundamental to the biochemistry of virtually all forms of life. When bound to coenzyme A it is central to the metabolism of carbohydrates and fats. However, the concentration of free acetic acid in cells is kept at a low level to avoid disrupting the control of the pH of the cell contents. Unlike some longer-chain carboxylic acids (the fatty acids), acetic acid does not occur in natural triglycerides. However, the artificial triglyceride triacetin (glycerin triacetate) is a common food additive, and is found in cosmetics and topical medicines.
Acetic acid is produced and excreted by certain bacteria, notably the Acetobacter genus and Clostridium acetobutylicum. These bacteria are found universally in foodstuffs, water, and soil, and acetic acid is produced naturally as fruits and some other foods spoil. Acetic acid is also a component of the vaginal lubrication of humans and other primates, where it appears to serve as a mild antibacterial agent.
Production
Purification and concentration plant for acetic acid in 1884
Acetic acid is produced both synthetically and by bacterial fermentation. Today, the biological route accounts for only about 10% of world production, but it remains important for vinegar production, as in much of the world food purity laws stipulate that vinegar used in foods must be of biological origin. About 75% of acetic acid made for use in the chemical industry is made by methanol carbonylation, explained below. Alternative methods account for the rest.
Total worldwide production of virgin acetic acid is estimated at 5 Mt/a (million tonnes per year), approximately half of which is produced in the United States. European production stands at approximately 1 Mt/a and is declining, and 0.7 Mt/a is produced in Japan. Another 1.5 Mt are recycled each year, bringing the total world market to 6.5 Mt/a. The two biggest producers of virgin acetic acid are Celanese and BP Chemicals. Other major producers include Millennium Chemicals, Sterling Chemicals, Samsung, Eastman, and Svensk Etanolkemi.
Methanol carbonylation
Most virgin acetic acid is produced by methanol carbonylation. In this process, methanol and carbon monoxide react to produce acetic acid according to the chemical equation:
CH3OH + CO → CH3COOH
The process involves iodomethane as an intermediate, and occurs in three steps. A catalyst, usually a metal complex, is needed for the carbonylation (step 2).
(1) CH3OH + HI → CH3I + H2O
(2) CH3I + CO → CH3COI
(3) CH3COI + H2O → CH3COOH + HI
By altering the process conditions, acetic anhydride may also be produced on the same plant. Because both methanol and carbon monoxide are commodity raw materials, methanol carbonylation long appeared to be an attractive method for acetic acid production. Henry Drefyus at British Celanese developed a methanol carbonylation pilot plant as early as 1925. However, a lack of practical materials that could contain the corrosive reaction mixture at the high pressures needed (200 atm or more) discouraged commercialisation of these routes for some time. The first commercial methanol carbonylation process, which used a cobalt catalyst, was developed by German chemical company BASF in 1963. In 1968, a rhodium-based catalyst (cis−[Rh(CO)2I2]−) was discovered that could operate efficiently at lower pressure with almost no by-products. The first plant using this catalyst was built by US chemical company Monsanto in 1970, and rhodium-catalysed methanol carbonylation became the dominant method of acetic acid production (see Monsanto process). In the late 1990s, the chemicals company BP Chemicals commercialised the Cativa catalyst ([Ir(CO)2I2]−), which is promoted by ruthenium. This iridium-catalysed process is greener and more efficient and has largely supplanted the Monsanto process, often in the same production plants.
Acetaldehyde oxidation
Prior to the commercialisation of the Monsanto process, most acetic acid was produced by oxidation of acetaldehyde. This remains the second most important manufacturing method, although it is uncompetitive with methanol carbonylation. The acetaldehyde may be produced via oxidation of butane or light naphtha, or by hydration of ethylene.
When butane or light naphtha is heated with air in the presence of various metal ions, including those of manganese, cobalt and chromium, peroxides form and then decompose to produce acetic acid according to the chemical equation
2 C4H10 + 5 O2 → 4 CH3COOH + 2 H2O
Typically, the reaction is run at a combination of temperature and pressure designed to be as hot as possible while still keeping the butane a liquid. Typical reaction conditions are 150 °C and 55 atm. Several side products may also form, including butanone, ethyl acetate, formic acid, and propionic acid. These side products are also commercially valuable, and the reaction conditions may be altered to produce more of them if this is economically useful. However, the separation of acetic acid from these by-products adds to the cost of the process.
Under similar conditions and using similar catalysts as are used for butane oxidation, acetaldehyde can be oxidised by the oxygen in air to produce acetic acid
2 CH3CHO + O2 → 2 CH3COOH
Using modern catalysts, this reaction can have an acetic acid yield greater than 95%. The major side products are ethyl acetate, formic acid, and formaldehyde, all of which have lower boiling points than acetic acid and are readily separated by distillation.
Ethylene oxidation
Acetaldehyde may be prepared from ethylene via the Wacker process, and then oxidised as above. More recently a cheaper single-stage conversion of ethylene to acetic acid was commercialised by chemical company Showa Denko, which opened an ethylene oxidation plant in Oita, Japan, in 1997. The process is catalysed by a palladium metal catalyst supported on a heteropoly acid such as tungstosilicic acid. It is thought to be competitive with methanol carbonylation for smaller plants (100–250 kt/a), depending on the local price of ethylene.
Fermentation
Oxidative fermentation
For most of human history, acetic acid, in the form of vinegar, has been made by bacteria of the genus Acetobacter. Given sufficient oxygen, these bacteria can produce vinegar from a variety of alcoholic foodstuffs. Commonly used feeds include apple cider, wine, and fermented grain, malt, rice, or potato mashes. The overall chemical reaction facilitated by these bacteria is
C2H5OH + O2 → CH3COOH + H2O
A dilute alcohol solution inoculated with Acetobacter and kept in a warm, airy place will become vinegar over the course of a few months. Industrial vinegar-making methods accelerate this process by improving the supply of oxygen to the bacteria.
The first batches of vinegar produced by fermentation probably followed errors in the winemaking process. If must is fermented at too high a temperature, acetobacter will overwhelm the yeast naturally occurring on the grapes. As the demand for vinegar for culinary, medical, and sanitary purposes increased, vintners quickly learned to use other organic materials to produce vinegar in the hot summer months before the grapes were ripe and ready for processing into wine. This method was slow, however, and not always successful, as the vintners did not understand the process.
One of the first modern commercial processes was the "fast method" or "German method", first practised in Germany in 1823. In this process, fermentation takes place in a tower packed with wood shavings or charcoal. The alcohol-containing feed is trickled into the top of the tower, and fresh air supplied from the bottom by either natural or forced convection. The improved air supply in this process cut the time to prepare vinegar from months to weeks.
Most vinegar today is made in submerged tank culture, first described in 1949 by Otto Hromatka and Heinrich Ebner. In this method, alcohol is fermented to vinegar in a continuously stirred tank, and oxygen is supplied by bubbling air through the solution. Using this method, vinegar of 15% acetic acid can be prepared in only 2–3 days.
Anaerobic fermentation
Some species of anaerobic bacteria, including several members of the genus Clostridium, can convert sugars to acetic acid directly, without using ethanol as an intermediate. The overall chemical reaction conducted by these bacteria may be represented as:
C6H12O6 → 3 CH3COOH
More interestingly from the point of view of an industrial chemist, many of these acetogenic bacteria can produce acetic acid from one-carbon compounds, including methanol, carbon monoxide, or a mixture of carbon dioxide and hydrogen:
2 CO2 + 4 H2 → CH3COOH + 2 H2O
This ability of Clostridium to utilise sugars directly, or to produce acetic acid from less costly inputs, means that these bacteria could potentially produce acetic acid more efficiently than ethanol-oxidisers like Acetobacter. However, Clostridium bacteria are less acid-tolerant than Acetobacter. Even the most acid-tolerant Clostridium strains can produce vinegar of only a few per cent acetic acid, compared to some Acetobacter strains that can produce vinegar of up to 20% acetic acid. At present, it remains more cost-effective to produce vinegar using Acetobacter than to produce it using Clostridium and then concentrating it. As a result, although acetogenic bacteria have been known since 1940, their industrial use remains confined to a few niche applications.
Applications
2.5- litre bottle of acetic acid in a laboratory.
2006 Wikipedia CD Selection
Acetic acid
General
Systematic name
Acetic acidEthanoic acid
Other names
Methanecarboxylic acidAcetyl hydroxide (AcOH)Hydrogen acetate (HAc)
Molecular formula
C2H4O2
SMILES
CC(=O)O
Molar mass
60.05 g/mol
Appearance
Colourless liquidor crystals
CAS number
[64-19-7]
Properties
Density and phase
1.049 g/cm3, liquid1.266 g/cm3, solid
Solubility in water
Fully miscible
In ethanol, acetoneIn toluene, hexaneIn carbon disulfide
Fully miscibleFully misciblePract. insoluble
Melting point
16.7 °C (289.9 K)(62.1 °F)
Boiling point
118.1 °C (391.2 K)(244.6 °F)
Acidity (pKa)
4.76
Viscosity
1.22 mPa·s at 25 °C
Dipole moment
1.74 D (gas)
Hazards
MSDS
External MSDS
EU classification
Corrosive (C)
NFPA 704
Flash point
43 °C
R-phrases
R10, R35
S-phrases
S1/2, S23, S26, S45
US Permissibleexposure limit (PEL)
10 ppm
Supplementary data page
Structure& properties
n, εr, etc.
Thermodynamicdata
Phase behaviourSolid, liquid, gas
Spectral data
UV, IR, NMR, MS
Related compounds
Related carboxylicacids
Formic acidPropionic acidButyric acid
Related compounds
AcetamideEthyl acetateAcetyl chlorideAcetic anhydrideAcetonitrileAcetaldehydeEthanol
Except where noted otherwise, data are given formaterials in their standard state (at 25 °C, 100 kPa)Infobox disclaimer and references
Acetic acid, also known as ethanoic acid, is an organic chemical compound best recognized for giving vinegar its sour taste and pungent smell. Pure water-free acetic acid is a colourless hygroscopic liquid, readily absorbs water, and freezes below 16.7 °C (62 °F) to a colourless crystalline solid. Acetic acid is corrosive, and its vapour is irritating to eyes and nose, although it is a weak acid based on its ability to dissociate in aqueous solutions.
Acetic acid is one of the simplest carboxylic acids. It is an important chemical reagent and industrial chemical that is used in the production of polyethylene terephthalate mainly in soft drink bottles; cellulose acetate, mainly for photographic film; and polyvinyl acetate for wood glue, as well as many synthetic fibres and fabrics. In households diluted acetic acid is often used in descaling agents. In the food industry acetic acid is used under the food additive code E260 as an acidity regulator.
The global demand of acetic acid is around 6.5 million tonnes per year (Mt/a), of which approximately 1.5 Mt/a is met by recycling; the remainder is manufactured from petrochemical feedstocks or from biological sources.
//
Nomenclature
The trivial name acetic acid is the most commonly used and officially preferred name by the IUPAC. This name derives from acetum, the Latin word for vinegar. The synonym ethanoic acid is a systematic name that is sometimes used in introductions to chemical nomenclature.
Glacial acetic acid is a trivial name for water-free acetic acid. Similar to the German name Eisessig (literally, ice-vinegar), the name comes from the ice-like crystals that form slightly below room temperature at 16.7 °C.
The most common and official abbreviation for acetic acid is AcOH or HOAc where Ac stands for the acetyl group CH3−C(=O)−. In the context of acid-base reactions the abbreviation HAc is often used where Ac instead stands for the acetate anion (CH3COO−), although this use is regarded by many as misleading. In either case, the Ac is not to be confused with the abbreviation for the chemical element actinium.
Acetic acid has the empirical formula C2H4O2. This is often written as CH3-COOH, CH3COOH, or CH3CO2H to better reflect its structure. The ion resulting from loss of H+ from acetic acid is the acetate anion. The name acetate can also refer to a salt containing this anion or an ester of acetic acid.
History
Frozen acetic acid
Vinegar is as old as civilization itself, perhaps older. Acetic acid-producing bacteria are present throughout the world, and any culture practicing the brewing of beer or wine inevitably discovered vinegar as the natural result of these alcoholic beverages being exposed to air.
The use of acetic acid in chemistry extends into antiquity. In the 3rd century BC, the Greek philosopher Theophrastos described how vinegar acted on metals to produce pigments useful in art, including white lead ( lead carbonate) and verdigris, a green mixture of copper salts including copper(II) acetate. Ancient Romans boiled soured wine in lead pots to produce a highly sweet syrup called sapa. Sapa was rich in lead acetate, a sweet substance also called sugar of lead or sugar of Saturn, which contributed to lead poisoning among the Roman aristocracy. The 8th century Persian alchemist Jabir Ibn Hayyan (Geber) concentrated acetic acid from vinegar through distillation.
In the Renaissance, glacial acetic acid was prepared through the dry distillation of metal acetates. The 16th century German alchemist Andreas Libavius described such a procedure, and he compared the glacial acetic acid produced by this means to vinegar. The presence of water in vinegar has such a profound effect on acetic acid's properties that for centuries many chemists believed that glacial acetic acid and the acid found in vinegar were two different substances. The French chemist Pierre Adet proved them to be identical.
In 1847 the German chemist Hermann Kolbe synthesised acetic acid from inorganic materials for the first time. This reaction sequence consisted of chlorination of carbon disulfide to carbon tetrachloride, followed by pyrolysis to tetrachloroethylene and aqueous chlorination to trichloroacetic acid, and concluded with electrolytic reduction to acetic acid.
Detail of acetic acid crystals
By 1910 most glacial acetic acid was obtained from the "pyroligneous liquor" from distillation of wood. The acetic acid was isolated from this by treatment with milk of lime, and the resultant calcium acetate was then acidified with sulfuric acid to recover acetic acid. At this time Germany was producing 10,000 tons of glacial acetic acid, around 30% of which was used for the manufacture of indigo dye.
Chemical properties
Acidity
The hydrogen (H) atom in the carboxyl group (−COOH) in carboxylic acids such as acetic acid can be given off as an H+ ion (proton), giving them their acidic character. Acetic acid is a weak, effectively monoprotic acid in aqueous solution, with a pKa value of 4.8. A 1.0 M solution (about the concentration of domestic vinegar) has a pH of 2.4, indicating that merely 0.4% of the acetic acid molecules are dissociated.
Cyclic dimer
Cyclic dimer of acetic acid; dashed lines represent hydrogen bonds.
The crystal structure of acetic acid shows that the molecules pair up into dimers connected by hydrogen bonds. The dimers can also be detected in the vapour at 120 °C. They probably also occur in the liquid phase of pure acetic acid, but are rapidly disrupted if any water is present. This dimerisation behaviour is shared by other lower carboxylic acids.
Solvent
Liquid acetic acid is a hydrophilic ( polar) protic solvent, similar to ethanol and water. With a moderate dielectric constant of 6.2, it can dissolve not only polar compounds such as inorganic salts and sugars, but also non-polar compounds such as oils and elements such as sulfur and iodine. It readily mixes with many other polar and non-polar solvents such as water, chloroform, and hexane. This dissolving property and miscibility of acetic acid makes it a widely used industrial chemical.
Chemical reactions
Acetic acid is corrosive to many metals including iron, magnesium, and zinc, forming hydrogen gas and metal salts called acetates. Aluminium, when exposed to oxygen, forms a thin layer of aluminium oxide on its surface which is relatively resistant, so that aluminium tanks can be used to transport acetic acid. Metal acetates can also be prepared from acetic acid and an appropriate base, as in the popular " baking soda + vinegar" reaction. With the notable exception of chromium(II) acetate, almost all acetates are soluble in water.
Mg( s) + 2 CH3COOH( aq) → (CH3COO)2Mg(aq) + H2( g)
NaHCO3(s) + CH3COOH(aq) → CH3COONa(aq) + CO2(g) + H2O( l)
Acetic acid undergoes the typical chemical reactions of a carboxylic acid, notably the formation of ethanol by reduction, and formation of derivatives such as acetyl chloride via nucleophilic acyl substitution. Other substitution derivatives include acetic anhydride; this anhydride is produced by loss of water from two molecules of acetic acid. Esters of acetic acid can likewise be formed via Fischer esterification, and amides can also be formed. When heated above 440 °C, acetic acid decomposes to produce carbon dioxide and methane, or to produce ketene and water.
Detection
Acetic acid can be detected by its characteristic smell. A colour reaction for salts of acetic acid is iron(III) chloride solution, which results in a deeply red colour that disappears after acidification. Acetates when heated with arsenic trioxide form cacodyl oxide, which can be detected by its malodorous vapours.
Biochemistry
The acetyl group, derived from acetic acid, is fundamental to the biochemistry of virtually all forms of life. When bound to coenzyme A it is central to the metabolism of carbohydrates and fats. However, the concentration of free acetic acid in cells is kept at a low level to avoid disrupting the control of the pH of the cell contents. Unlike some longer-chain carboxylic acids (the fatty acids), acetic acid does not occur in natural triglycerides. However, the artificial triglyceride triacetin (glycerin triacetate) is a common food additive, and is found in cosmetics and topical medicines.
Acetic acid is produced and excreted by certain bacteria, notably the Acetobacter genus and Clostridium acetobutylicum. These bacteria are found universally in foodstuffs, water, and soil, and acetic acid is produced naturally as fruits and some other foods spoil. Acetic acid is also a component of the vaginal lubrication of humans and other primates, where it appears to serve as a mild antibacterial agent.
Production
Purification and concentration plant for acetic acid in 1884
Acetic acid is produced both synthetically and by bacterial fermentation. Today, the biological route accounts for only about 10% of world production, but it remains important for vinegar production, as in much of the world food purity laws stipulate that vinegar used in foods must be of biological origin. About 75% of acetic acid made for use in the chemical industry is made by methanol carbonylation, explained below. Alternative methods account for the rest.
Total worldwide production of virgin acetic acid is estimated at 5 Mt/a (million tonnes per year), approximately half of which is produced in the United States. European production stands at approximately 1 Mt/a and is declining, and 0.7 Mt/a is produced in Japan. Another 1.5 Mt are recycled each year, bringing the total world market to 6.5 Mt/a. The two biggest producers of virgin acetic acid are Celanese and BP Chemicals. Other major producers include Millennium Chemicals, Sterling Chemicals, Samsung, Eastman, and Svensk Etanolkemi.
Methanol carbonylation
Most virgin acetic acid is produced by methanol carbonylation. In this process, methanol and carbon monoxide react to produce acetic acid according to the chemical equation:
CH3OH + CO → CH3COOH
The process involves iodomethane as an intermediate, and occurs in three steps. A catalyst, usually a metal complex, is needed for the carbonylation (step 2).
(1) CH3OH + HI → CH3I + H2O
(2) CH3I + CO → CH3COI
(3) CH3COI + H2O → CH3COOH + HI
By altering the process conditions, acetic anhydride may also be produced on the same plant. Because both methanol and carbon monoxide are commodity raw materials, methanol carbonylation long appeared to be an attractive method for acetic acid production. Henry Drefyus at British Celanese developed a methanol carbonylation pilot plant as early as 1925. However, a lack of practical materials that could contain the corrosive reaction mixture at the high pressures needed (200 atm or more) discouraged commercialisation of these routes for some time. The first commercial methanol carbonylation process, which used a cobalt catalyst, was developed by German chemical company BASF in 1963. In 1968, a rhodium-based catalyst (cis−[Rh(CO)2I2]−) was discovered that could operate efficiently at lower pressure with almost no by-products. The first plant using this catalyst was built by US chemical company Monsanto in 1970, and rhodium-catalysed methanol carbonylation became the dominant method of acetic acid production (see Monsanto process). In the late 1990s, the chemicals company BP Chemicals commercialised the Cativa catalyst ([Ir(CO)2I2]−), which is promoted by ruthenium. This iridium-catalysed process is greener and more efficient and has largely supplanted the Monsanto process, often in the same production plants.
Acetaldehyde oxidation
Prior to the commercialisation of the Monsanto process, most acetic acid was produced by oxidation of acetaldehyde. This remains the second most important manufacturing method, although it is uncompetitive with methanol carbonylation. The acetaldehyde may be produced via oxidation of butane or light naphtha, or by hydration of ethylene.
When butane or light naphtha is heated with air in the presence of various metal ions, including those of manganese, cobalt and chromium, peroxides form and then decompose to produce acetic acid according to the chemical equation
2 C4H10 + 5 O2 → 4 CH3COOH + 2 H2O
Typically, the reaction is run at a combination of temperature and pressure designed to be as hot as possible while still keeping the butane a liquid. Typical reaction conditions are 150 °C and 55 atm. Several side products may also form, including butanone, ethyl acetate, formic acid, and propionic acid. These side products are also commercially valuable, and the reaction conditions may be altered to produce more of them if this is economically useful. However, the separation of acetic acid from these by-products adds to the cost of the process.
Under similar conditions and using similar catalysts as are used for butane oxidation, acetaldehyde can be oxidised by the oxygen in air to produce acetic acid
2 CH3CHO + O2 → 2 CH3COOH
Using modern catalysts, this reaction can have an acetic acid yield greater than 95%. The major side products are ethyl acetate, formic acid, and formaldehyde, all of which have lower boiling points than acetic acid and are readily separated by distillation.
Ethylene oxidation
Acetaldehyde may be prepared from ethylene via the Wacker process, and then oxidised as above. More recently a cheaper single-stage conversion of ethylene to acetic acid was commercialised by chemical company Showa Denko, which opened an ethylene oxidation plant in Oita, Japan, in 1997. The process is catalysed by a palladium metal catalyst supported on a heteropoly acid such as tungstosilicic acid. It is thought to be competitive with methanol carbonylation for smaller plants (100–250 kt/a), depending on the local price of ethylene.
Fermentation
Oxidative fermentation
For most of human history, acetic acid, in the form of vinegar, has been made by bacteria of the genus Acetobacter. Given sufficient oxygen, these bacteria can produce vinegar from a variety of alcoholic foodstuffs. Commonly used feeds include apple cider, wine, and fermented grain, malt, rice, or potato mashes. The overall chemical reaction facilitated by these bacteria is
C2H5OH + O2 → CH3COOH + H2O
A dilute alcohol solution inoculated with Acetobacter and kept in a warm, airy place will become vinegar over the course of a few months. Industrial vinegar-making methods accelerate this process by improving the supply of oxygen to the bacteria.
The first batches of vinegar produced by fermentation probably followed errors in the winemaking process. If must is fermented at too high a temperature, acetobacter will overwhelm the yeast naturally occurring on the grapes. As the demand for vinegar for culinary, medical, and sanitary purposes increased, vintners quickly learned to use other organic materials to produce vinegar in the hot summer months before the grapes were ripe and ready for processing into wine. This method was slow, however, and not always successful, as the vintners did not understand the process.
One of the first modern commercial processes was the "fast method" or "German method", first practised in Germany in 1823. In this process, fermentation takes place in a tower packed with wood shavings or charcoal. The alcohol-containing feed is trickled into the top of the tower, and fresh air supplied from the bottom by either natural or forced convection. The improved air supply in this process cut the time to prepare vinegar from months to weeks.
Most vinegar today is made in submerged tank culture, first described in 1949 by Otto Hromatka and Heinrich Ebner. In this method, alcohol is fermented to vinegar in a continuously stirred tank, and oxygen is supplied by bubbling air through the solution. Using this method, vinegar of 15% acetic acid can be prepared in only 2–3 days.
Anaerobic fermentation
Some species of anaerobic bacteria, including several members of the genus Clostridium, can convert sugars to acetic acid directly, without using ethanol as an intermediate. The overall chemical reaction conducted by these bacteria may be represented as:
C6H12O6 → 3 CH3COOH
More interestingly from the point of view of an industrial chemist, many of these acetogenic bacteria can produce acetic acid from one-carbon compounds, including methanol, carbon monoxide, or a mixture of carbon dioxide and hydrogen:
2 CO2 + 4 H2 → CH3COOH + 2 H2O
This ability of Clostridium to utilise sugars directly, or to produce acetic acid from less costly inputs, means that these bacteria could potentially produce acetic acid more efficiently than ethanol-oxidisers like Acetobacter. However, Clostridium bacteria are less acid-tolerant than Acetobacter. Even the most acid-tolerant Clostridium strains can produce vinegar of only a few per cent acetic acid, compared to some Acetobacter strains that can produce vinegar of up to 20% acetic acid. At present, it remains more cost-effective to produce vinegar using Acetobacter than to produce it using Clostridium and then concentrating it. As a result, although acetogenic bacteria have been known since 1940, their industrial use remains confined to a few niche applications.
Applications
2.5- litre bottle of acetic acid in a laboratory.
